background image

About this manual

This manual is designed to assist you in 
using the iQuest Roam Camera. Information
in this document has been carefully checked
for accuracy; however, no guarantee is given
to the correctness of the contents. The 
information in this document is subject to
change without notice.

Edition

1st Edition, June , 2001

Copyright

© Copyright 2001

This document contains proprietary 
information protected by copyright. All rights
are reserved. No part of this manual may be
reproduced by any mechanical, electronic or
other means, in any form, without prior 
written permission of the manufacturer.

Federal Communications
Commission Compliance

This equipment has been tested and found 
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide 
reasonable protection against harmful 
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no 
guarantee that interference will not occur in 
a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be 
determined by turning the equipment off and
on, the user is encouraged to try to correct
the interference by one or more of the 
following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the 

equipment and the receiver.

• Connect the equipment onto an outlet on 

a circuit different from that to which the 
receiver is connected.

• Consult the dealer or an experienced 

radio/TV technician for help.

Declaration of Conformity

This device complies with part 15 of the FCC
rules. Operation is subject to the following 
conditions:

This device may not cause harmful 
interference.

This device must accept any interference
received, including interference that may
cause undesired operation.

Trademark Recognition

SiPix, iQuest Roam are registered trademarks
of SiPix, Inc.

Other product names used in this manual are
the properties of their respective owners and
are acknowledged.

Safety and handling precautions

Camera information

• Do not take apart or attempt to service the

camera yourself.

• Do not expose the camera to moisture, or 

extremes in temperature.

• Let the camera warm up when moving 

from a cold to a warm temperature.

• Do not touch the lenses of the camera.

• Do not expose the lens to direct sunlight 

for extended periods of time.

Battery information

• Turn off the camera before installing or 

removing batteries.

• Use AA alkaline batteries only.

• Do not use batteries that are leaking, 

corroded, or damaged.

• Always replace batteries with two new 

AA alkaline batteries. 

• Caution - if using rechargeable batteries the 

battery life display may be incorrect and 
cause the camera to malfunction.

• Remove the batteries from the camera if 

you are going to store the camera for 
extended periods.

Содержание SiPix
































Отзывы: