3
Instruction version: 4
A1037 :
Falcon 500 windbreak full instructions
Putting the windbreak up
• Take the windbreak from the bag and lay onto the ground. (image 1)
• Put the poles together and once together slide them into the sleeves on the windbreak. (image 2)
• Ensure that the spiked end of the pole is pointing upwards and goes tough the eyelet (image 3)
and the round end of the pole is at the bottom (image 4)
• Starting at the end of the windbreak, take two guylines and place the end of the pole into the
ground, then attach the guylines to the top pin on the windbreak pole. Using the guylines keep the
pole in position by pegging each guyline out in opposite directions. (image 5)
• Repeat along each pole in the windbreak.
• You can also peg the bottom of the windbreak using the provided pegs as shown in image 6
Image 1
Image 4
A
A
B
B
B
Image 2
Image 5
Image 3
Image 6
