5.1 Pre-Installation
Before installing take care to ensure that you have read the
instructions, have all the required equipment and have measured
your installation to allow for the length of connecting cables.
The Q1 water sanitisation system
The Q1 Installation kit consists of:
l
1 x Q1 Control Unit
l
2 x Electrolysis cells containing
o 1 x coated Titanium plate assembly
o 1 x 2 Cu/Ag electrodes
o EM Descaler & o-rings
o Reducers
l
Installation Guide (this guide)
l
Copper / pH test kit
Additional Installation Materials
The following materials will or may be required:
l
pressure pipe
l
pipe angles as appropriate to fit
l
PVC Pipe cleaner, primer and adhesive
l
Cable ties
l
Mounting screws for control Unit
Recommended Tools
Only basic tools are required for implementation.
l
PVC Pipe Saw
l
Electric drill is recommended
l
Always wear PPE for power tools
WARNING !
Only operate the Quest Q1 when you have the pool pump switched
on and you have water flowing through the ioniser ,oxidiser and
de-scaler chamber.
WARNING !
This system must be installed and serviced by a qualified pool
or water sanitiser technician. Incorrect installation and servicing
could create electrical hazards and could result in damage to the
property, fire, serious injury or death.
WARNING !
Only have the system installed by a qualified electrician and all
electrical work including wiring carried out to the local electrical
regulations.
13
Содержание Q1
Страница 1: ...Operators Installation Guide...
Страница 18: ...Installation Guide 16...
Страница 24: ...www questpools com au YOUR AUTHORISED QUEST RESELLER IS...