![background image](http://html1.mh-extra.com/html/quest-engineering/dr4300e/dr4300e_owners-manual_772522039.webp)
DR4300 Owners Manual
Boot Settings
39
Viewing Boot Settings
To view the
Boot Settings
screen, perform the following steps:
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE:
If your operating system begins to load before you press F2, wait for the system to finish
booting, and then restart your system and try again.
3. On the
System Setup Main Menu
screen, click
System BIOS
.
4. On the
System BIOS
screen, click
Boot Settings
.
Related tasks
See also:
See also:
Related references
See also:
See also:
Boot Settings details
The
Boot Settings
screen details are explained as follows:
Option
Description
Boot Mode
Enables you to set the boot mode of the system.
CAUTION:
Switching the boot mode may prevent the system from booting if the operating
system is not installed in the same boot mode.
If the operating system supports UEFI, you can set this option to
UEFI
. Setting this field to
BIOS
allows
compatibility with non-UEFI operating systems. This option is set to
BIOS
by default.
NOTE:
Setting this field to
UEFI
disables the
BIOS Boot Settings
menu. Setting this field to
BIOS
disables the
UEFI Boot Settings
menu.
Boot Sequence Retry
Enables or disables the Boot Sequence Retry feature. If this option is set to
Enabled
and the system fails to boot,
the system reattempts the boot sequence after 30 seconds. This option is set to
Enabled
by default.
Hard-Disk Failover
Specifies the hard drive that is booted in the event of a hard drive failure. The devices are selected in the
Hard-
Disk Drive Sequence
on the
Boot Option Setting
menu. When this option is set to
Disabled
, only the first hard
drive in the list is attempted to boot. When this option is set to
Enabled
, all hard drives are attempted to boot in
the order selected in the
Hard-Disk Drive Sequence
. This option is not enabled for UEFI Boot Mode.
Boot Option Settings
Configures the boot sequence and the boot devices.
BIOS Boot Settings
Enables or disables BIOS boot options.
Содержание DR4300e
Страница 1: ...DR4300e System Owner s Manual ...
Страница 181: ...DR4300 Owners Manual 181 Index ...