4
Template version: 3
SP2134 :
40L Chilli coolbox and warmer full instructions
Usage
•
• First open the cable management section (as shown in image A above) by sliding the red
vent out of the way and remove the plugs and cables to allow access to the main switches as
shown in image B above.
• Then make sure that both the power and mode switches are in the OFF state, as shown in
image 1 below.
• Then take the plug (either mains or 12v) you require from and insert it into the appropriate
socket. The coolbox is then ready to be used in cooling or warming mode.
• Cooling
: Set the power switch to the COLD position and the mode to MAX, as shown in image
2.. The green indicator will be on indicating the unit is in cooling mode..
• Warming
: Set the power switch to the HOT position and the mode to MAX, as shown in image
3. The red indicator will be on indicating the unit is in heating mode.
• ECO-Mode
: You can use the cooler in ECO mode which draws less electric and can help your
power source last longer, but will limit the cooling and warming effect of the cooler. To use the
eco-mode simply move the mode switch over to the ECO setting.
When using on 12V
Please remember that when being used on 12V it could drain your vehicle battery, so we always
recommend running your vehicle when thhe cooler is being used to help prevent your battery
being drained..
COLD
HOT
OFF
OFF
ECO
MAX
COLD
HOT
OFF
OFF
ECO
MAX
COLD
HOT
OFF
OFF
ECO
MAX
image 1
image 2
image 3