Chapter1: Getting Started
5
You can record data on any or all of these channels. The IAQ
Monitor comes factory programmed with the CO
2
, temperature and
humidity channels turned on (they will be recorded), and the toxic
gas and linear channels turned off (they will not be recorded).
The present readings for the CO
2
, temperature and humidity
channels and Dew Point are always available for display, even if
you are not recording them.
Readings from the toxic gas channel will only appear on the display
if a toxic gas sensor is plugged in when the IAQ Monitor is turned
on. If you want to record data from the toxic channel, you must use
Quest Suite Professional to program the IAQ Monitor to do so.
Readings from the linear channel will only appear on the display if
the IAQ Monitor is programmed to record data on that channel.
To change which channels will be recorded, or make other
programming choices, you must use Quest Suite Professional to
make your selections and then reprogram the IAQ Monitor
Default Recorder Setup
The IAQ Monitor comes factory programmed for common test
conditions, allowing immediate operation. All setup choices may be
changed using Quest Suite Professional.
The following lists default settings programmed at the factory:
CO
2
Range: 5000 ppm
Instrument Mode: Data Logging
Storage Period: 1 second sample
Memory Mode: Stop when Full
Display Overall Statistics: Brief (displays all tests)
Temperature Scale: °F
Display Backlight: Enabled
Secure Code: 1-2-3-1
Record
CO
2
: On
Record Relative Humidity: On
Record Temperature: On
Record Toxic Gas: Off
Record Analog Input: Off
Содержание AQ5000 Pro
Страница 2: ......
Страница 5: ...Table Of Contents Chapter 4 Specifications Accessories 38 Specifications 37 Accessories 41 ...
Страница 47: ......