6. Press “PAN-A” to add the fifth preset position and the LED displays “P - -”, enter preset
position number “02”, then press “ACK” and the LED displays “S01”; enter speed“04”, then
press “ACK” and the LED displays “005”; enter dwell time “003”, then press “ACK” and the
LED displays “P01”
7. Press “PAN-A” to add the sixth preset position and the LED displays “P - -”, enter preset
position number “06”, then press “ACK” and the LED displays “S01”; enter speed“08”, then
press “ACK” and the LED displays “005”; enter dwell time “004”, then press “ACK” and the
LED displays “P01”
8. Press “F2/OFF” to exit operation and the LED displays “g - 1”, then press “EXIT” to return
the keyboard to initialization.
Four tours can be setup, and each tour can include up to 16 tour positions (any preset
position from 1-128)
Setup desired tour positions in the tour
Dwell time on each preset position can be different (1-225 sec.), and motor speed to each
position can also be different (1-8 range)
6.3.2 Preview a Tour
In the keyboard initialization, enter the tour number (1-4) and press ”GRP” key, then the
dome camera begins running the tour. If a position is not preset or cancelled after being preset, it
will not be scanned.
key
Function
FUN
Select menu
F2
end
ACK
Confirm
GRP
Running a tour
EXIT
Cancel current operation
6.4 Automatic Scan (Scan between Two Points)
Scroll the dome camera to the start position of the scan between two points (point A) and
press “Pan-A” key. Scroll the dome camera to the end position (point B) and press “Pan-B” key.
