LPWA Module Series
BG952A-GL_QuecOpen_Hardware_Design
51 / 72
5.3. Reference Design of RF Layout
For users’ PCB, the characteristic impedance of all RF traces should be controlled to 50 Ω. The
impedance of the RF traces is usually determined by the trace width (W), the materials’ dielectric constant,
the
height
from the reference ground to the signal layer (H),
and the spacing between RF traces and
grounds (S)
. Microstrip or coplanar waveguide is typically used in RF layout to control characteristic
impedance. The following are reference designs of microstrip or coplanar waveguide with different PCB
structures.
Figure 24: Microstrip Design on a 2-layer PCB
Figure 25: Coplanar Waveguide Design on a 2-layer PCB
Содержание QuecOpen BG952A-GL
Страница 5: ...LPWA Module Series BG952A GL_QuecOpen_Hardware_Design 4 72 metal powders ...
Страница 10: ...LPWA Module Series BG952A GL_QuecOpen_Hardware_Design 9 72 Table 42 Terms and Abbreviations 71 ...
Страница 56: ...LPWA Module Series BG952A GL_QuecOpen_Hardware_Design 55 72 For more details visit http www hirose com ...
Страница 80: ...LPWA Module Series BG952A GL_QuecOpen_Hardware_Design 79 72 ...
