GNSS Module Series
LC98S_EVB_User_Guide 21 / 27
②
Figure 10:
Firmware
Download
– Step 2
Step 3:
Select the “
Port
” and “
Baud Rate
” and then click “
Start
” button. Press and hod the BOOT button
before flipping the power switch (S201) to
ON
position, and the release the BOOT button to enter
Boot Download mode.
③
Figure 11:
Firmware
Download
– Step 3
Step 4:
Upon successful firmware upgrade, the GNSSFlashTool green progress bar on the screen will
indicate “PASS”, as shown in the figure below.
