GNSS Module Series
LC98S_EVB_User_Guide 16 / 27
5
Test via QGNSS Tool
This chapter explains how to use the QGNSS software tool for verifying the status of GNSS module. For
more information about QGNSS use, see
document [2]
Download the QGNSS tool from our website Download Zone or request it from Quectel Technical Support.
5.1.
QGNSS Setting
Step 1:
Assemble the EVB components.
Step 2:
Flip the Power switch (S201) to
ON
position to power on the EVB.
Step 3:
Start the QGNSS and click “
Setting
” and “
Serial Port Configuration
” (Default baud rate:
115200 bps
2
)
, as shown in the figure below.
Figure 7: COM Port and Baud Rate Setting
Step 4:
Click the “
Connect or disconnect
” button. The interface shown in the figure below appears
once the module is connected.
2
UART interface default settings vary depending on software versions.
