GNSS Module Series
LC98S_EVB_User_Guide 10 / 27
2.2.
Connect Cables and Antenna to EVB
The connection between the EVB and its components is shown in the figure below. For more information
on how to connect the EVB and its components, refer to the instruction sheet inside the EVB Kit.
Figure 2: EVB and Components Assembly
⚫
Make sure that the Active GNSS Antenna is placed with a clear line of sight to the sky.
USB Cable
Micro-USB Cable
1
USB Flash Drive
8 GB USB Flash Drive (including the module-related
documents, tools, and drivers)
1
GNSS Antenna
Active GNSS Antenna
Request the Antenna Datasheet from Quectel Technical
Support.
1
Instruction Sheet
Sheet providing instructions on how to connect the EVB and
its components, detailed information on EVB contents, etc.
1
Others
Bolts and Coupling Nuts
4 pairs
NOTE
