GT200 User manual
No response from
UART when
configure GT200
through UART
GT200 is in power saving mode.
Remove the Data_Cable_M,
and plug it in again. After this
operation, GT200 will exit
from power saving mode for 10
seconds.
5.2.
Safety info
z
Please do not immerse the device in liquids.
z
Please do not store the device in wet, dirty or dusty environments.
z
Please do not expose the device to extreme temperatures.
z
Please do not place the phone in or near microwave emitting devices.
z
Please do not operate or store the device near flammable materials.
z
Please do not use the device in restricted areas without permission.
z
Avoid dropping, throwing or putting heavy pressure on the device.
z
Please do not attempt to, or actually open, or alter the device or any of its accessories from its
casing in any way.
z
Only use authorized approved accessories with the device.
TRACGT200UM002
- 13 -
Quectel