Quectel GL100, Руководство пользователя

Страница: 18 / 54

GL100 @Track Air Interface Protocol
Parameter Length(byte) Range/format Default
password 4~8 ‘0’-‘9’,’a’-‘z’,’A’-‘Z’ gl100
ack type 1 1
ack value 8 1
send time 14 YYYYMMDDHHMMSS
—
< ack type >: A numeric to indicate in which kind of connection the terminal will wait for the
acknowledgements from the backend server.
1: TCP packet. Not supported at this time.
2: UDP packet.
4: SMS PDU. Not supported at this time.
—
< ack value >: An unsigned integer in HEX format with each bit representing a type of uplink
message. If the corresponding bit is set as 1 and the uplink message is sent through the
connection specified by <ack type> , the terminal will wait for the SYNC-ACK message.
Otherwise, the terminal will not wait for the SYNC-ACK message. The following is the
relationship between each bit and the uplink message. If the SYNC-ACK message is needed
for all of the uplink messages, < ack type > is set as “FFFFFFF”.
bit0 +RESP:GTTRI
bit1 +RESP:GTEST
bit2 +RESP:GTRTL
bit3 +RESP:GTSOS
bit4 +RESP:GTALL
bit5 +RESP:GTPNA
bit6 +RESP:GTPFA (Not supported at this time
）
bit7 +RESP:GTPLA
bit8 +RESP:GTSZI
bit9 +RESP:GTGEO
bit10 +RESP:GTCID
bit11 +RESP:GTCSQ
bit12 +RESP:GTSWV
bit13 +RESP:GTHWV
bit14 AT+GTHBD
bit15 +RESP: GTLBC
bit16 +RESP:GTLGT
bit17 +RESP:GTBTC
bit18 +RESP:GTSTC
bit19 +RESP:GTCBC
bit20 +RESP:GTINF
bit21 +ACK:GTSRI
bit22 +ACK:GTBEI
bit23 +ACK:GTTRI
bit24 +ACK:GTRTO
bit25 +ACK:GTSFR
bit26 +ACK:GTGEO
bit27 +ACK:GTACK
The acknowledgment message of the AT+GTACK command:
¾
+ACK:GTACK,
Example:
+ACK:GTACK,359231030000010,20090101000000,20090101000002,11F0,0102100203
Parameter Length(byte) Range/format Default
unique id 15 IMEI
TRACGL100AN002
- 17 -
Quectel
Confidential