GL100 @Track Air Interface Protocol
“LGT”:
<
command option
> = 0
“RTL”:
<
command option
> = 1
“READ”:
<
command option
> = 2
“REBOOT”: <
command option
> = 3
“RESET”: <
command option
> = 4
“CID”:
<
command option
> = 5
“CSQ”:
<
command option
> = 6
“SWV”:
<
command option
> = 7
“HWV”:
<
command option
> = 8
“SPEED”: <
command option
> = 9
“CBC”:
<
command option
> = A
“PWROFF”: <
command option
> = B
“REPINF”: <
command option
> = C
3.2.6. Special Function
The
AT+GTSFR
command is used to configure some special functions of the terminal such as:
enable/disable power key, the definition of function key, movement detection, enable/disable full
power up when charger is connected.
¾
AT+GTSFR=
Example:
AT+GTSFR=gl100,1,1,0,1,1,20,500,3,0,20090101000000
Parameter
Length(byte)
Range/format
Default
password 4~8
‘0’-‘9’,’a’-‘z’,’A’-‘Z’
gl100
power key enable
1
0|1
1
function key enable
1
0|1
1
function key mode
1
0|1|2
0
position delay
3
7-900(s)
7
movement detect mode
1
0|1
movement speed
<=4
0-999(km/h)
movement distance
<=4
0-9999(m)
movement send number
1
1-5
5
full power up
1
0|1
0
send time
14
YYYYMMDDHHMMSS
<
power key enable
>: The end user cannot power down the terminal by using the power key
when the parameter is set to “0”.(Refer to chapter 4.5.1)
<
function key enable
>: The function key is disabled when the parameter is set to “0”.(Refer
to chapter 4.5.2)
<
function key mode
>:
0: Geo-Fence mode.
1: SOS mode.
2: Geo-Fence in current position. Enable or disable Geo-Fence mode and use the current
TRACGL100AN002
- 15 -
Quectel
Confidential
