FCC Declaration
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced radio/TV technician for help
NOTE: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s
authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance of
20
cm between the radiator and your body. This transmitter must not be co-located or
operating
in conjunction with any other antenna or transmitter.
The requirement for KDB 996369 D03
List of applicable FCC rules
FCC CFR Title 47 Part 22 Subpart H CFR Title 47 Part 22 Subpart H
CFR Title 47 Part 15 Subpart B
Summarize the specific operational use conditons
This module has been granted Single Modular Approval for mobile applications. OEM
integrators for host products may use the module in their final products without additional
FCC certifications if they meet the following conditions. Otherwise, additional FCC
approvals must be obtained.
The host product with the module installed must be evaluated for simultaneous
