QubicaAMF Harmony, Инструкция по установке, эксплуатации, обслуживанию и каталог запасных частей

Страница: 11 / 72

I
NTRODUCTION
Harmony Ball Return Manual – 400-254-022
1
Rev. Date 3/16
1.0 HOW TO USE THIS MANUAL
This manual contains information needed to properly install, operate, and maintain the
Harmony Ball Return. If any terms, concepts, or operations contained in this manual are not
clear to you, consult an experienced professional or QubicaAMF Technical Support.
2.0 INTRODUCTION
Before you begin the installation, check your shipment against the packing list to ensure that all
parts have been included. Report missing items to QubicaAMF at 866-460-QAMF (7263)
between the hours of 8:30AM and 5:30PM Eastern Time. After 5:30PM, you can leave a
message on the voice mail system. The 24-hour fax line is (804) 559-8650. Address all faxes to
QubicaAMF Products Technical Support. You can also e-mail Technical Support at
emtechsupport@qubicaamf.us.

When you see this symbol associated with an
instruction, a possible hazard is indicated. Follow these
instructions carefully.

Before installing, removing, or replacing electrical
equipment, ensure that the supply power to the unit has
been turned OFF at the main circuit breaker box in
accordance with your center’s lock out and tag out
procedures.

The ball return accepts either 115 VAC or 230 VAC input
power. The fuses (provided) in the control unit must be
correctly sized based on the input voltage.

The ball return system uses 3.8A @ 115 VAC and 1.9A @
230 VAC. We recommend a 1200w circuit for each ball
return with a circuit breaker for every two units.

Protect the approach and lane surfaces before you begin
installation of the ball return unit.

Before applying power to a ball return, be sure that all cables have been connected
properly — especially the main power cables – and that the control box is closed.

Before operating a ball return, be sure that all GUARDS are in place.

Do NOT pass anything other than 10-pin bowling balls through the unit.

Do NOT place your hand or any other object into the ball lift.

A bowling ball presents a pinching hazard as it exits the lift and when it comes
into contact with another ball on the ball rack. Do NOT place your hand inside
the ball lift exit opening, and exercise caution when removing a ball from the
rack.

The lift is to operate in an air-conditioned indoor environment.

The control box’s IP rating is 30.
WARNING!
Read This
BEFORE
Proceeding.
TO AVOID INJURY:
Read these safety
precautions before
attempting to install or
modify any equipment.
Failure to follow these
procedures may result in
severe personal injury, fire,
or permanent damage to
property.