CenterPunch Lighting Effects Server Owner's Manual
II
P/N: 400275000; Rev. F, 03/22
General installation notes
For devices directly connected to the power, it is necessary to check that the electrical capacity of the system
is suitable for the maximum power requirements of the equipment (as indicated on the labels of the
equipment).
Always open the circuit breaker and disconnect the power plug from the powered units before looking for,
and clearing, any problem.
To reduce the risk of fire or electrical shock, do not expose this equipment to moisture.
This appliance must be positioned such that the mains supply cord connector is accessible after installation.
Be aware of the voltage being supplied to the equipment (i.e. from 100V to 240V) and that the equipment is
set for the correct voltage (when applicable).
Failure to set the equipment for the correct voltage will result in damage to the equipment.
The electrical safety of the equipment is obtained only when the equipment is connected to an effective
GROUNDING SYSTEM (in accordance with the existing electrical codes and safety regulations).
It is necessary to have the power and grounding inspected by a licensed and certified electrician.
The manufacturer cannot be responsible for possible injury, damages or malfunctioning of the equipment
due to the absence of or improper grounding of the equipment.
Temperature and Humidity requirements
All QubicaAMF
ELECTRONIC
products are specifically designed and engineered to be used inside a bowling
center environment.
QubicaAMF
ELECTRONIC
equipment has an
OPERATING
temperature range of 15° to 35° C (59° to 95° F) and
an
OPERATING
humidity range of 10% to 80%.
Temperatures and humidity levels outside the listed ranges will negatively affect the operation and lifespan
of the QubicaAMF
ELECTRONIC
equipment.
QubicaAMF strongly suggests not to use or store any of the supplied electronic equipment where the
temperature and humidity level cannot stay within the specified ranges.
Restrictive temperature and humidity requirements are specified by the producer of the lanes that will not
be listed inside this manual.
