MINI MEZZANINE
0101Q001
4. Assembling the bed
Quax nv
Karel Picquélaan 84 B-9800 Deinze Belgium
T
T
0032 9 380 80 95 www.quax.eu -
E
E
23
Step 4.1 :
Use both head boards
EB1-L
and
EB1-R
, six connectors
A
and two connectors
C
Tighten two connectors (
A
) in the upper and third
drilling at the top right-hand side of the head
board (
EB1-L
). Tighten one connector (
A
) in the
middle drilling at the top left of the panel. Tighten
one connector (
C
) in the middle drilling at the
bottom of the head board.
Tighten two connectors (
A
) in the upper and third
drilling at the top left-hand side of the head board
(
EB1-R
). Tighten one connector (
A
) in the middle
drilling at the top right of the panel. Tighten one
connector (
C
) in the middle drilling at the bottom
of the head board.
The left head board is now code
AB-1L
and the
right one
AB-1R
Step 4.2 :
Use of the frontal bed side
EB2
bed, two supports
EB4
, two maxifi x
B
, four wooden dowels
E
, four wooden
dowels
F
and eight wood screws
G
Push two wooden dowels (
E
) into the drillings on the ends of the bed side (
EB2
). Place the supports (
EB4
) on the holes
at the bottom of the bed side. Push eight wood screws (
G
) into the drillings of the supports and tighten into the bed side.
Push four wooden dowels (
F
) into the holes above the profi les. Push a maxifi x (
B
) into the drillings on the outside of the
bed side.
The frontal bed side is now code
AB-2
.
