Quatech MPAP-200 Скачать руководство пользователя страница 61 | Manualshive

Страница: 61 / 64

background image

22.2.1 With Card and Socket Services

The enabler should NOT be used if any Card and Socket Services are present on the

system. If Card and Socket Services is installed, the enabler may interfere with its operation and
with the device(s) it controls. The client driver should be used to configure the MPAP-200 if
Card and Socket Services are installed.

22.2.2 Socket Numbers

The enabler requires the socket number to be specified on the command line. Some

vendors number their sockets beginning with 1 while other vendors number

their sockets

beginning with 0. The enabler considers the first socket in the system

to be socket 0.

22.2.3 Memory range exclusion

The enabler requires a region of high DOS memory. This region is 1000h bytes (4 KB)

long and by default begins at address D0000H (the address may be changed using the "W"
parameter). If a memory manager such as EMM386, QEMM, or 386Max is installed on the
system, this region of DOS memory must be excluded from the memory manager's control.
Consult the documentation provided with the memory manager software for instructions on how
to exclude this memory region.

Some systems use the high memory area for BIOS shadowing to improve overall system

performance. In order for the enabler to operate, BIOS shadowing must be disabled in the
address range specified for the configuration window. BIOS shadowing can usually be disabled
through the system's CMOS setup utility.

22.3 OS/2 Client Driver

22.3.1 Resources Not Available

It is the user's responsibility to ensure the I/O address and IRQ resources are available.

For OS/2 Warp users, the RMVIEW utility may be useful in finding resource conflicts. Type
"rmview /?" at an OS/2 command prompt for details. On OS/2 Warp 4.0, the Hardware
Manager object in the System Setup folder provides a graphical view of the same information.

22.3.2 Insufficient Number Of Command Line Arguments

The MPAP-200 command line must contain at least one command line argument for each

MPAP-200 to be installed.

22.3.3 Bad Parameters

61

«
...
59
60
61
62
63
...
»

Содержание MPAP-200

































































Отзывы:

Нет отзывов

Похожие инструкции для MPAP-200

Growing Together

Бренд: Stokke Страницы: 13

Бренд: J5create Страницы: 2

Бренд: Oehlbach Страницы: 84

Бренд: cable matters Страницы: 12

DUAL-BAND Wi-Fi

Бренд: Belkin Страницы: 38

Бренд: Adaptec Страницы: 12

Бренд: Atheros Страницы: 39

Бренд: Compex Страницы: 2

Бренд: Apex Digital Страницы: 2

Бренд: Universal Electronics Страницы: 2

Бренд: Sony Страницы: 40

Бренд: Cyber Acoustics Страницы: 6

Бренд: Iomega Страницы: 2

Бренд: Vonage Страницы: 23

Бренд: TELEFONICA Страницы: 46

Бренд: Sonnet Страницы: 2

Solo10G SFP+ Thunderbolt 3 Edition

Бренд: Sonnet Страницы: 2

Thunderbolt Twin 10G

Бренд: Sonnet Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды