Quatech DSP-100, Руководство пользователя

Страница: 29 / 40

The X8 clock mode locks the ports hardware clock at
eight times the standard rate. The baud rate the port
runs at will always be eight times the rate requested by
the application. This mode is useful for legacy
applications which cannot request baud rates over
115.200.
921,600 X8
The X4 clock mode locks the ports hardware clock at
four times the standard rate. The baud rate the port
runs at will always be four times the rate requested by
the application. This mode is useful for legacy
applications which cannot request baud rates over
115.200.
460,800 X4
The X2 clock mode locks the ports hardware clock at
double the standard rate. The baud rate the port runs at
will always be double the rate requested by the
applications. This mode is useful for legacy
applicattions which cannot request baud rates over
115,200
230,400 X2
The X1 clock mode mimics a standard COM port. The
hardware drivers lock the clock to the standard rate.
The port will run at the baud rate requested by the
application.
115,200 X1
Auto clock mode enables applications to request any
baud rate up to 921,600. The hardware drivers will
select the correct clock multiplier based on the baud
rate requested
921,600 Auto
Description Max bps Clock Mode
Data Rate Multiplier
5. Open the Properties dialog for the DSP-100 device, then click the Resources tab to
view the Input/Output Range and Interrupt Request resource allocations. If options
that are not available on the preceding pages are required, a different basic
configuration will have to be selected. To do this, de-select the
Use Automatic
Settings box and choose the basic configuration that corresponds to the set of options
required.
Windows 2000 4-9