Quasimidi Technox страница 10 Скачать руководство пользователя

Страница: 10 / 53

7.) Editing of the single-sounds

Coming from the main-page you have to press the “EDIT/OK” key to enter the edit menu. By Using the
two alpha-dials you can reach the sub-menu to edit a part:

Edit/Function

<2> Edit Part

Press "Edit/OK" once more and the display changes to:

Part 1 SndGroup

|1> SynthLead

With the “Parameter/Soundgroup”-dial you may step through the following menu-pages. If you like to
listen to the changes immediately you first have to select the part corresponding to the send-channel of
your connected keyboard.

<1>

Part\13\SndGroup

|1>\SynthLead

To accelerate the search for a specific sound, all sounds are divided into groups.
With the “VALUE”-dial the groups can be selected.

<2>

Part\13\Sound

<2>\_303Lead

On the second parameter-page you can select the single-sounds directly. Reaching
the last sound of a group and going on automatically swaps to the next group.

<3>

Part\13\_303Lead

<3>\Mode:\\\\\On

With this parameter you decide how a sound is played. The both monophonic
modes allow the use of portamento. They simulate the single-trigger playing like
the old analog synth of former days. The envelopes are triggered only if the
previous key is released. The following modes are available:

Mode: OFF- the part is disabled

Mode ON- the selected part can be played polyphonic.

Mode: MONO- the part can be played only monophonic. The highest note has
priority when pressing more than one key.

Mode: LEAD- the part can be played only monophonic. The last note has priority
when pressing more than one key.

<4>

Part\13\_303Lead

<4>\Level:\\\127

With this parameter you can regulate the volume of the chosen part.

<5>

Part\13\_303Lead

<5>\Panorama:___

With this parameter the part can be placed in panorama. The different types and
effects of the panorama are shown later on this page.

<6>

Part\13\_303Lead

<6>\FX1-Send:\\0

The send-level of the part-signal that is sent to the effect processor 1 (FX1) can be
selected in this menu.

<7>

Part\13\_303Lead

<7>\FX2-Send:\63

The send-level of the part-signal that is sent to the effect processor 2 (FX2) can be
selected in this menu.

<8>

Part\13\_303Lead

<8>\CoarseT:\-12

Each part can be tuned individually. Here you can change the coarse-tune in
semi-tones.

<9>

Part\13\_303Lead

<9>\FineTune:\+0

Each part can be tuned individually. Here you can change the fine-tune e.g. for
detune-effects between two simultaneously playing parts to make a sound more
fat. Warm and full sounds are the result.

Here you see the different panorama-positions and effects, which Technox offers in the part-edit menu.

Panorama:---

At this value, the signal can only pass the output through the FX-processors.

Panorama:L<7-R>7

Different absolute positions are selectable between left and right.

Panorama:RND

Random-Panorama - every new note has another pan-position

Panorama:key\or\yek

The pan-position is controlled by the keynumber of the played note.

Panorama:dyn\or\nyd

The pan-position is controlled by the dynamics (Key-velocity)

QUASIMIDI STYLEDRIVE FANSEITE