7
2.b.) BASIC OPERATIONS
The "POWER" switch [1] is used to (guess!) turn your TECHNOX on. So, usually, you'll use it once-
right in the beginning of your musical work. When using it for the second time, you'll obviously will hear
- nothing, because your TECHNOX is switched off.
The "PARAMETER/SOUNDGROUP" Alpha-dial [3] has two functions. When in sequencer mode (main
page), the soundgroups for the different parts may be selected with this dial; in the edit-mode you'll
change the different sound-parameters and menus.
The "VALUE/SOUND" Alpha-dial [4] is used for changing the single-sounds in the sequencer-mode, and
during sound-editing it is used for altering the values of the selected sound parameters.
You'll use the "EDIT/OK" key [8] to select the edit-mode, to change the edit level, and for the confirmation
of some questions you will be asked by the TECHNOX from time to time.
The "EXIT" [9] key is used to exit a selected menu in the edit-mode.
The "PART/BANK" keys [5] are used to select the different parts within the "Multi-Sequencer-Mode"
and for the selection of different performance banks in Performance-mode.
Now you'll get an overview over the different edit-levels of your TECHNOX. After pressing the "EDIT/OK"
key once, the different edit menus can be selected with the "PARAMETER/SOUNDGROUP" Alpha-dial.
The selection of the edit level has to be confirmed by pressing the "EDITOK" key once. The following
table gives you in the first row a reference to the page of this manual where the corresponding edit level
will be explained in detail. The TECHNOX offers you the following edit-menus:
|1>
Page
22 ff
\Edit/Function
|1>\Edit Common
Here you find the parameters concerning the modulation matrix. Also the
performance-mode and the performance-overall-volume can be controlled within
this menu.
<2>
Page
09 ff
\Edit/Function
<2>\Edit\Part
The part-parameters can be edited in this menu-level. Part parameters alter the
sound characteristics of the selected single sound for this part. The changes can be
memorized in performance memories or sequencer-multi-setups.
<3>
Page
19 ff
\Edit/Function
<3>\Edit\Drums
Here in this menu one of the 8 possible drum-sets can be edited. Each of the drum
and percussion sounds can be edited individually by changing its volume,
pan-position and the FX1 and FX2 sends.
<4>
Page
12 ff
\Edit/Function
<4>\Edit\FX1
In this menu you'll find the different parameters for effect processor FX1. To hear
the parameter changes it is necessary that the FX1 send of the actual part is turned
on.
<5>
Page
15 ff
\Edit/Function
<5>\Edit\FX2
Same as "Edit FX1" menu - but for FX2. Make sure that FX2 send is turned on for
the selected part to hear the parameter changes.
<6>
Page
25 ff
\Edit/Function
<6>\Edit\Arpegg.
Here you'll find all the different parameters for the arpeggiator.
<7>
Page
27 ff
\Edit/Function
<7>\Edit\System
In this menu you get the global parameters for your TECHNOX, i.e. all parameter
changes have effect on all parts and performances simultaneously. Global
parameters are e.g. the global tuning, transpose and MIDI functions.
<8>
Page
26 ff
\Edit/Function
<8>\Write/Dump
Under this menu level you can store your edits, copy them or send SysEx bulks via
MIDI in order to archive your individual setups in your computer or MIDI data
recorder.
<9|
Page
29
\Edit/Function
<9|\Play\Demo...
Here you´ll find the TECHNOX demonstration song.
QUASIMIDI STYLEDRIVE FANSEITE
http://people.freenet.de/styledrive/
Содержание Technox
Страница 1: ...1 Technox OWNER s manual...
Страница 2: ...2 QUASIMIDI STYLEDRIVE FANSEITE http people freenet de styledrive...
Страница 52: ...52 QUASIMIDI STYLEDRIVE FANSEITE http people freenet de styledrive...
Страница 53: ...53 Copyright 94 QUASIMIDI Musikelektronik GmbH QUASIMIDI STYLEDRIVE FANSEITE http people freenet de styledrive...
