Quasar ARM, Руководство пользователя

Страница: 7 / 15

FM Transmitter - a wireless FM signal transmitter, you can use
wireless headphones with an FM receiver, or connect wired
headphones to your phone / player, turn on the FM receiver
on them, and hide the device somewhere in the inside pocket
to search comfortably, because between the device and the
search engine do not “hang” any extra wires. The signal
transmission range is up to 5 meters
• FM ON \ OFF –– turn the transmitter on and off.
ATTENTION!!! When the transmitter is on, sound is not output
to the device’s speaker and can only be heard through the
receiver.
• FM frequency – transmitter frequency. It is in the standard
range of 70.0 MHz –108.0 MHz. It is necessary to choose a free
frequency so as not to listen to coin signals on the chanson fm
wave
 It should also be noted that if the search is carried out
next to a similar device at the same transmitter frequency,
then at a distance of 3-5 meters You will listen to each other's
signals, you need to use different signal transmission
frequencies.
Menu item HW OPTIONS - HARDWARE SETTINGS.
TX frequency - (TX transmit loop frequency). Allows you to set
the frequency of the device within 4-20kHz. The mode is
needed not only to set the frequency of the TX, but also to
tune the TX circuit to resonance. In manual mode, the
frequency is changed using the "Left" and "Right" buttons,