No compensator –the actual balance of the sensor with the
compensator turned off.
Compensator on / off –– enable or disable the auto-
compensator.
USER PROFILE Menu Item - USER PROFILES
Save setting-record the current settings in the selected profile.
There are 8 profiles available. Factory reset-reset the device to
“initial basic” >> click CATERORALLY I DO NOT RECOMMEND,
it’s better to load an empty profile, there will be basic
settings. Load setting-restore previously saved settings from
the profile.
Menu item BACKLIGHT LEVEL - SCREEN BACKLIGHT LEVEL;
Backlight — Setting the brightness level of the backlight; 0 -
off ... 100 - the highest brightness. Change the value with the
buttons "Right" and "Left." “OK” - exit with saving the result,
“Esc” - exit without saving.
USER PWM Menu Item - THROUGH CURRENT ADJUSTMENT
User PWM – value (from 0 to 64) of the level of the user signal
of pulse width modulation PWM (PWM). In our case, this is
the sensor current control signal. In the top line, use the Up,
Down, or Left, or Right buttons to set the PWM level. The
bottom line displays the current value in the TX sensor coil.
Current is displayed in mA milliamperes.
Содержание ARM
Страница 1: ...QUASAR user guide...
