Quasar ARM, Руководство пользователя

Страница: 4 / 15

Pinpoint - called by pressing the "right" button. Static search
mode - designed to more accurately localize the target. Exit -
pressing any key. To set the initial state of sensitivity of the
pinpoint, press the "Left" button, using the "Up / Down"
buttons the sensitivity of the pinpoint is adjusted.
Soil balance –called by pressing the “OK” button. For correct
readings, enter this menu with the sensor raised above the
ground. The top line displays the response from the ground in
graphical form, with 0 in the middle. In the bottom line is the
value of the current angle of the soil response in degrees. The
manual angle can be changed using the "Left" and "Right"
buttons, the step is 0.1 degrees. Raising and lowering the
sensor should achieve minimal deviations on the upper scale.
For the changes to take effect, you need to click "OK", if you
exit by pressing Esc, the changes are not remembered. When
you press any of the Up or Down buttons (from the balance
screen), the automatic ground adjustment mode starts. This
mode should be started with the sensor raised, after which
the user has about 4 seconds to lower and raise the sensor.
The angle of response of the soil will be calculated,
remembered, and the device will switch to the main mode.