![background image](http://html2.mh-extra.com/html/quartz/q256-sv/q256-sv_system-manual_4831442064.webp)
Quartz Q256-SV System Manual
MANUAL-08
1. NONE
2. ODD
3. EVEN
4. MARK
Please select port 3 parity:
1…4
1. 7 data bits
2. 8 data bits
Please select port 3 data bits:
1/2
1. 1 stop bit
2. 2 stop bits
Please select port 3 stop bits:
1/2
If Quartz Protocol selected:
Enter first level to map to (eg 1=V(default), 2=A, 3=B)
1…8
Should port 1 show take update messages?(y/n)
y/n
If Q-Link port:
Please enter the Q-Link address for this port:
0…64
…then repeats for each port….
…then returns with value = 0.
You must then reset the processor before the new values will take effect.
Set Ethernet Address (cmd: setmacaddr)
Allows the user to set the mac (low level Ethernet) address. This is for Quartz use only.
Get Ethernet Address (cmd: getmacaddr)
Allows the user to set the mac (low level Ethernet) address. This is for Quartz use only.
Set Manufacturing Data (cmd: epset)
Allows the user to set the electronic manufacturing data to be programmed into each module. Do not use as
this feature is not fully supported and is for Quartz factory use only.
Get Manufacturing Data (cmd: epget)
Allows the user to get the electronic manufacturing data programmed into each module. Do not use as this
feature is not fully supported and is for Quartz factory use only.
Comms Fitted Data (cmd: commsfitted)
Allows the user to get the electronic data programmed into each rear comms module. Do not use as this
feature is not fully supported and is for Quartz factory use only. Note that this command uses the I
2
C
diagnostic bus and any device numbers displayed will not match PCI bus numbers.
Issue 1.72
edited: 26 Sept 2005
Page 64
Содержание Q256-SV
