Quartet IdeaShare, Быстрая настройка

Страница: 9 / 29

Figure B
To use the Quartet Portable IdeaShare in virtual touchscreen mode:
1. Set up a single electronic pen with the plastic stylus insert. The plastic stylus insert
looks just like a dry-erase marker except it is entirely plastic and contains no ink.
2. Connect the USB cable to the Quartet Portable IdeaShare receiver and your
computer, and set up the software as shown on the Quick Set Up Guide.
3. Attach the projector to your computer, and make sure that both the projector and
your computer are turned on.
4. Aim and focus the projector as near the center of the whiteboard as possible.
5. Launch eBeam Software on your computer, and make sure that you are in
projection mode. You will also need to calibrate. See “Projection/Virtual
Touchscreen Mode” on page 16. To make sure that you are in projection mode:
•
PC: Open the eBeam task bar menu and select “Use With Projector”
• Macintosh OS 9.X: Open the eBeam control panel from the control strip menu
and select “Projection mode”.
• Macintosh OS 10: Open the eBeam System Settings dialog from the eBeam
docklet icon. Select “Projection mode”.
6. Begin using the Quartet Portable IdeaShare and whitebaord as a virtual
touchscreen. Click or double-click applications to open them, move files, draw in
paint programs, or share a meeting using the eBeam meeting software. Anything
that you can do with the mouse attached to your computer, you can do with
Quartet Portable IdeaShare using the electronic pen and stylus.
Chapter 2 Page 5
https://www.supplychimp.com