Section 2:
Loading Driver Firmware
Page 12
The 2800 is now waiting for the computer to begin the download process. Clicking the
Connect
button will cause
the ScreenMaker software to query the attached product and validate its compatibility. The dialog below will
display if you forget to press the Next key on the 2800 or if a serial communication link can not be established.
The Firmware Download dialog will display if a successful serial link is established.
From this dialog select:
Start Download
Within a couple minutes the download will be complete.
The 2800 will again display:
WAITING FOR COMMAND
FROM COMPUTER
Remove power from the 2800 and set
DIP switch 4 to the OFF position (down).
The 2800 is now ready to accept your Project File. The next section describes the procedure.
PM2800U3K Revision 4
