Quark-Elec Manual
https//www.quark-elec.com
12 of 15
2016
V1.0
The following is a sample setting for the OpenCPN plotter. COM2 was set as the QK-A023 input and
COM1 is used for a standard serial port GPS input.
Other software is available such as SeaClear, PolarNavy, PolarView. They all have similar settings.
http://www.sping.com/seaclear/
http://www.polarnavy.com/main/prod1
Figure 11Serial port setting on OpenCPN
For WiF
i connection, „Network‟ rather than „Serial‟ needs to be selected in „Connections->Properties‟
and the following settings need to be input.
AIS input is in COM2
GPS input is in COM1
