Quark-Elec Manual
https//www.quark-elec.com
11 of 15
2016
V1.0
6 H
OPPING INTERVAL
In the new V2.0 QK-A023, it is now possible to set the hopping interval manually via the GUI.
`
This enables the operator to specify hopping intervals of 1s, 30s and 0.25s according to preference
and need.
Our patented algorithm is likely to pick up more messages, faster than the manual settings but there
are certain environments and locations where manual setting may be desirable. An article is available
explaining this is on our blog:
https://www.quark-elec.com/blog/2017/12/20/latest-field-test-of-patented-autohopping-algorithm/
The Configuration Software (GUI) can be used to adjust these settings, including baud rates and WiFi
settings. You can download the software here:
https://quark-elec.com/doc/QE_MUX_configTool.zip
Detailed instructions on how to use the Configuration software are available here:
https://www.quark-elec.com/doc/QK-A0xx_GUI_application_note.pdf
Please check that no other APPs or programs are open when using the Configuration GUI.
7 W
ORKING WITH
O
PEN
CPN
OpenCPN is free software that can be used to view concise chart plotter and navigation information, It
is available for use on both Windows and the MAC OSX system from:
