Quantum ValueLoader DLT VS160, Технические характеристики товара

Страница: 24 / 62

Internal Tape Drive Mounting Hole Dimensions DLT VS160 Product Specification
2-4 September 2004 81-81275-01 REV A02
2.2 Internal Tape Drive Mounting Hole Dimensions
Figure 2-1 shows the mounting holes and dimensions in a bottom view for the internal tape drive.
N
OTES
: 1 The dimension referenced in boxed note 1 [1] is from the front of the base plate.
2 The dimension referenced in boxed note 2 [2] is from the right-side tape drive mounting plane to the
interior guiding surface of the media opening.
3 The dimension referenced in boxed note 3 [3] is from the bottom tape drive mounting hole to the
interior guiding surface of the media opening.
4 The tape drive width and length are standard 5¼-inch form factor measurements.
5 Dimensions are identical on left side and right sides.
6 Dimensions are in millimeters. The dimensions in brackets [x.x] are in inches.
Figure 2-1. Internal Tape Drive Mounting Hole Dimensions (Bottom View)
139.7 ± 0.381
[5.500 ± .015]
79.38 ± 0.25
[ 3.125 ± .010 ]
48.52± 0.254
[ 1.910 ± .010 ]
124.84
[ 4.92 ]
105.41
[ 4.15 ]
127.99
[ 5.04 ]
22.58 ± 0.55
[ .889 ± .021 ]
19.43 ± 0.7
[ .765 ± .027 ]
1
2
3
Data cartridge