Quantum Scalar 1000 Скачать руководство пользователя страница 185

Страница: 185 / 304

Scalar DLC Reference Guide

169

The

not active

LUN becomes

active

after a client (SCSI Client) assigned to it. Refer to

SCSI Client

on page

147.

Create Target

Under the SCSI Port properties, the

Add new Target

button appears (active for the

enabled

ports only).

Clicking it opens a pop-up target creation pane.

Figure 120

SCSI Target Creation

Note

The LUN 0 cannot be removed manually. It is deleted only with the Target.

Note

Because of interface properties, one and only one SCSI Client can be assigned to the
single LUN.

CAUTION

After the client is assigned to the LUN 0 of any target, all other clients
assigned to the non-zero LUNs of this target are activated.

Note

Only administrator users can create targets. For the user without administrative
privileges, the

Add new Target

button is disabled.

Field/Button

Icon

Operation

Description

Target ID

Supplied

The target ID (internal).

Name

Supplied

The target name. Contains ‘Target’ and the SCSI ID.

SCSI ID

Enter

The target SCSI ID (external, seen by SCSI initiator).

SCSI Mode

Select

The target operating mode.
Only

SCSI-2

and

SCSI-3

are currently supported.

LUN Vendor ID

Select

Current target LUN 0 vendor ID.

LUN Product ID

Select

Current target LUN 0 product ID. The format of the
data transferred from/to the SCSI initiator.

Содержание Scalar 1000

















































































































































































































































































































Результаты поиска

Содержание Scalar 1000

Отзывы:

Quantum Scalar 1000, Справочное руководство, Страница: 185 / 304

Результаты поиска

Содержание Scalar 1000

Отзывы: