Quantum P4000 Series, Руководство пользователя

Страница: 88 / 168

Chapter 3 Operator Commands
Performing an Inventory
68 Quantum P4000 and P7000 Libraries User’s Guide
Performing an Inventory
3
The
Inventory Tapes
command reads the bar code labels of the cartridges
in the tape drives, fixed storage bins, and the load port bins. All elements
that contain cartridges without labels are marked as full with no label.
1 Press the
Inventory Tapes
button in the Operator screen.
The GUI displays a “Command In Progress” screen.
2 Press the
Abort
button to stop continuous running of the inventory
process, otherwise, the process continues until all storage elements
have been inventoried.
Moving Cartridges
3
The
Move Cartridges
command allows you to move any tape cartridge in
the library to the destination you specify. This destination can be a
storage bin, a tape drive, the load port, or the gripper.
To move a cartridge:
1 In the
Operator
screen, press the
Move Cartridges
button.
The GUI displays the
Control: Move Cartridges
screen, with the
Source input field active (see figure 39 ).
Note: The inventory process is also stopped if an error is
detected. In this case, the GUI displays an error message.
Note: To move a cartridge from a tape drive, issue an Unload Drive
command as explained in Unloading a Drive .