Quantum P4000 Series Скачать руководство пользователя страница 141

Страница: 141 / 168

Appendix C Automatic Drive Cleaning

Cleaning Cartridges

Quantum P4000 and P7000 Libraries User’s Guide

121

Storage and
Tracking

Each cleaning cartridge is tracked from the time that it is loaded into the

library. When a cleaning cartridge is unloaded from the library, the

library no longer retains information concerning that cleaning cartridge

(bar code). If a new cleaning cartridge with the identical bar code is then

imported into the library, it is considered a different cleaning cartridge

for all tracking purposes.
Each cleaning cartridge must have a unique bar code. If a cleaning

cartridge with a duplicate bar code label is imported, the original

cleaning cartridge is moved to the load port for removal from the library.
After a cleaning cartridge is used twenty times it is moved to the load

port for removal from the library.
The library adjusts for cleaning cartridges that are manually moved

within the library while the library is off-line. When an inventory is

performed (after power-up or a transition from off-line to on-line), all

cartridges are scanned and identified. Each cleaning cartridge is checked

for a previous record of location and use. Cartridges that remain in

previous locations retain their previous usage information.
If previous records do not show a cleaning cartridge with the same bar

code at a given location, the library checks if a cleaning cartridge with the

same bar code label was previously located at another location (and is not

currently at that other location). If so, the library assumes that it is the

same cleaning cartridge that was manually moved and retains all

cleaning cartridge information. If the library cannot locate a previous

record for the cleaning cartridge, it assumes the cleaning cartridge is new

and creates a new record for it.

Monitoring Usage

The library maintains a usage history for each cleaning cartridge within

the library. The usage history is a count of the number of times the

cleaning cartridge was used to clean a drive.
When a cleaning cartridge has been identified and imported into the

library, the usage history for that cleaning cartridge is initialized and set

to zero (0).
Each time a cleaning cartridge is removed from a drive by the robotics,

the “use count” for that cleaning cartridge is incremented by one. When

the “use count” reaches the maximum allowable number of 20, (in

automatic cleaning mode) the cleaning cartridge is moved to the load

port.

Содержание P4000 Series









































































































































































Результаты поиска

Содержание P4000 Series

Отзывы:

Похожие инструкции для P4000 Series

Бренды по названию

Популярные бренды

Quantum P4000 Series, Руководство пользователя

Результаты поиска

Содержание P4000 Series

Отзывы:

Похожие инструкции для P4000 Series

Бренды по названию

Популярные бренды