Quantum ATL 4000 Library Unpacking Instructions
Document 6434005-02, Ver. 2, Rel. 0
August 2002
18
Unpacking the Library
Figure 17 Rolling the
Library Down the Ramp
Unpacking the Library
0
To unpack the library:
1
Using the power cable from the accessory kits, connect the library
to a grounded power source.
2
Unlock and open the library door:
a
Using the key from the accessories kit, unlock the door.
b
Lift the door handle straight up and then turn the handle to
unlatch the door.
c
Gently pull on the door handle to open the door.
3
Remove the foam pads from inside the front doors and around the
robotics.
Note:
Do not turn on the library.
Note:
Save the bolts, washers and shipping plate for use in
repacking the library, if required at a later date.
