ADIC Management Console User’s Guide
9
Before Installing AMC
AMC uses Ethernet to communicate. Your Ethernet network must be in place before AMC is installed.
1
Obtain the network parameters for the client, the server, as well as any other Scalar libraries in the SAN.
•
Use static IP addresses.
•
If the Scalar libraries in the SAN are not on the same TCP/IP subnet as the server, assign a
default network gateway address and/or route table entries.
2
Save this configuration information for future reference.
3
Run Ethernet cable from the server to the network hub or switch.
4
Run Ethernet cable from clients to the network hub.
5
Run Ethernet cable from the network hub to the Scalar libraries in the SAN.
6
Configure the network according to the procedures for the operating system you are using.
Installing the AMC Server
To manage your SAN, you must install an instance of the server onto a system that is connected by Ethernet
to your storage products and the systems where the clients are running. This server cannot be identical to
the server embedded in the i-platform libraries.
Installing the Server on a Windows System
Install the AMC server after you have completed the steps in
Before Installing AMC
on page 9.
1
Load the product CD.
2
Click the install link under the ADIC Management Console.
3
Click
OK
.
This starts the InstallAnywhere program, which prompts you throughout the installation.
4
When you are prompted to choose an installation set, select
Server Only
if you do not wish to run the
AMC client on that host, or
Full
if you do.
5
When you are asked to configure network discovery, be sure the network segment you define includes
the SAN components you identified in
Step 2
of
Before Installing AMC
on page 9.
6
The e-mail configuration portion of the installation requires the following information:
•
Network name of your mail server, for example, MyMailServer.
•
Valid e-mail account for the specified SMTP server, for example, Joan.Dow
•
Valid password for this e-mail account, for example, *u!nBe
CAUTION
Verify that you have enough space, about 100 MB, in the temporary
directory to be able to complete the installation.
CAUTION
AMC server version must match AMC client version. When the client
and the server are different versions, they may not be able to
communicate.
Содержание Management Console 4.4
