Quantum LTO-9 HH SAS, Руководство пользователя

Страница: 51 / 120

Chapter 4: Operations
Mid-tape Recovery
Quantum LTO-9 HH SAS User’s Guide 43
Note: Always remove an ejected cartridge before reinserting.
Whenever you unload a tape cartridge, the drive writes any pertinent
information to the cartridge memory.
Mid-tape Recovery
If reset occurs while a cartridge is loaded, the drive will slowly rewind
the tape and eject the cartridge. If a power cycle occurs while a
cartridge is loaded, the drive will slowly rewind the tape. The drive will
not automatically eject the cartridge.
If the tape is at EOT when the reset occurs, normally, it will take 2-3
minutes for the tape to rewind, but if a problem occurs during recovery, it
can take up to an hour. Always give the drive time to recover following a
power cycle with a tape in the drive.
The Ready light flashes and the SCD displays random segments during
tape movement. Push the
Unload
button to eject the cartridge when
the Ready light stops flashing.
Cleaning the Drive Head
Caution: When cleaning the drive head, use the Quantum LTO
Ultrium Cleaning Cartridge. You may use another LTO
cleaning cartridge, but it may not meet the standards of
reliability established by Quantum.
Clean the drive head whenever C displays on the Single-character
Display and the Fault light is flashing once per second. It is not
recommended that you clean the drive head on a periodic basis; only
when the drive requests to be cleaned.