14
Installing a Second Tape Drive or Replacing a Tape Drive
LTO-3, LTO-4, LTO-5, LTO-6, LTO-7 and LTO-8
Figure 19 Connecting One
Drive on One SCSI Bus
Note:
To prevent possible data errors, when there is only one drive on a SCSI bus, the
tape drive should be connected to the SCSI connector closest to the terminator.
Caution:
To avoid damaging the equipment due to electrostatic discharge, be sure to
practice ESD procedures when handling the tape drive.
3
Tape drive 1
SCSI bus 1
cable
SCSI ID cables,
one for each
tape drive
Tape drive 2
SCSI terminator
SCSI bus 1
cable
SCSI terminator
