background image

A Quantum Rehab Provider or a qualified technician 

must perform the initial setup of this power chair and 

must perform all of the procedures in this manual.

The symbols below are used throughout this owner’s 

manual and on the power chair to identify warnings 

and important information. It is very important for you 

to read them and understand them completely.

Indicates a potentially hazardous condition/situation. 

Failure to follow designated procedures can cause either 

personal injury, component damage, or malfunction. On 

the product, this icon is represented as a black symbol 

on a yellow triangle with a black border.

These actions should be performed as specified. Failure 

to perform mandatory actions can cause personal injury 

and/or equipment damage. On the product, this icon is 

represented as a white symbol on a blue dot with a white 

border.

These actions are prohibited. These actions should 

not be performed at any time or in any circumstances. 

Performing a prohibited action can cause personal 

injury and/or equipment damage. On the product, this 

icon is represented as a black symbol with a red circle 

and red slash.

Copyright © 2018
INFMANU4938/Rev C/April 2018

SECURITY GUIDELINES

Intended Use

The intended use of the Pride Mobility Products device 

is to provide mobility to persons limited to a seated 

position that have the capacity of operating a powered 

wheelchair.

Regarding Devices for Prescription Use

CAUTION! Federal law restricts this device to sale by or 

on the order of a physician or other certified personnel 

licensed by the law of the State (US only) or region in 

which this personnel practices to use or order the use 

of the device.

NOTE: This owner’s manual is compiled from the latest 
specifications and product information available at 
the time of publication. We reserve the right to make 
changes as they become necessary. Any changes to 
our products may cause slight variations between the 
illustrations and explanations in this manual and the 
product you have purchased. The latest/current version 
of this manual is available on our website.

NOTE: This product is compliant with WEEE, RoHS, and 
REACH directives and requirements.

NOTE: This product meets IPX4 classification (IEC 
60529).

NOTE: This product and its components are not made 
with natural rubber latex. Consult with the manufacturer 
regarding any after-market accessories.

Quick Reference Information

WARNING!

MANDATORY!

PROHIBITED!

WARNING!

WARNING!

Quantum Rehab Provider:

Address:

Telephone:

Purchase Date:

Содержание KOZMO

























Отзывы: