Quantum DXi4500, Руководство пользователя

Страница: 185 / 226

Chapter 9: DXi4500 Utilities
Analyzer
Quantum DXi4500 User’s Guide 163
The system you specify in the IP Address box should have NetServer
enabled (see Settings on page 163).
3 Click Start to begin the analysis.
Note: It takes approximately 5 seconds to refresh the results.
The throughput result is displayed below in MB/sec.
Settings
The network performance monitor tests the network performance
between the DXi4500 and your network. You must have a network
performance client installed on a local host to use this feature.
Note: Network performance clients such as
NetPerf
for Windows and
Linux are available from the Internet.
To enable or disable NetServer:
1
From the
Network
page, click the
Settings
tab.
2
Select
Enabled
or
Disabled
and click
Apply
.
3
When you are done testing the network performance, disable the
network performance monitor.
Disk Analysis
Disk analysis measures the hard disk performance (disk read and write
performance) on the system.
To perform hard disk analysis:
1 From the Analyzer page, click the Disk tab.
2 Click Start to begin the analysis.
Note: It takes approximately 5 seconds to refresh the results.
The throughput result is displayed below in KB/sec.