Quantum DXi V1000, Руководство по управлению

Страница: 76 / 344

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
68 Utility CLI Commands
Node Management
syscli --nodemanage --reboot | --shutdown | --resetdiag [--node {1 | 2|
all}] [--sure]
This CLI command allows the admin user to reboot, shutdown or reset the
diagnostic state on a node. If the --sure option is specified, no confirmation
prompt is displayed. Note that --node 2 is an invalid option in release 2.x.
License Management
The following license management commands are available:
• Displaying Licenses
• Adding a License
Displaying Licenses
syscli --list license
This CLI command allows the user to list the available licenses on the system. An
example output of available licenses is shown below:
List of Licenses:
Total count = 7
[License = 1]
License Name = NAS
Installed = No
Date Installed = ‐‐ Not Installed ‐‐
License Description = Expose NAS interface to host
[License = 2]
License Name = Backup Application Specific
Installed = No
Date Installed = ‐‐ Not Installed ‐‐
License Description = Enables Backup Application Specific
[License = 3]
License Name = De ‐ Duplication
Installed = Yes
Date Installed = 2009
-
06
-
01 15:32:42
License Description = Enables De ‐ Deduplication
[License = 4]
License Name = Replication
Installed = Yes
Date Installed = 2009
-
06
-
03 08:59:17
License Description = Enables Replication