Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
280
CLI Error Codes
E8050081
CliListBonds: Failed to get /sys/class/net/bondX/bonding/
slaves file!
E8050082
CliListBonds: Failed to get /sys/class/net/bondX/bonding/
mode file!
E8050083
CliListBonds: Failed to get bond IP info!
E8050084
CliListBonds: Sysapi_GetBondOwner not implemeneted yet!
E8050085
Sysapi_GetPortState: Failed to get port state!
E8050086
Sysapi_GetCarrierState: Failed to get carrier state!
E8050100
The netcfg script is not found!
E8050101
The netcfg script failed to generate the xml file!
E8050110
Netmask cannot be zero!
E8050111
Netmask is invalid, the rightmost bit must be zero!
E8050112
Netmask cannot contain non consecutive zero bits
E8050120
Network device name cannot be empty!
E8050121
Network device name is missing before comma!
E8050122
Network device name is missing after comma!
E8050123
Device name must start with an alphabetic label (valid
format is <label><devno>[:<vifno>])
E8050130
Device name: device number is missing (valid format is
<label><devno>[:<vifno>])
E8050131
Device name: device number is invalid
E8050132
Device name: device number is out of range
E8050133
Device name: device number has invalid trailing character!
E8050137
MTU frame size is out of range! Range is 1500 to 9000 bytes.
E8050140
Device name: virtual interface number is missing (valid
format is <label><devno>[:<vifno>])
E8050141
Device name: virtual interface number is invalid
E8050142
Device name: virtual interface number is out of range!
E8050143
Device name: virtual interface number has invalid trailing
character!
E8050150
Command cannot run because custom configuration is
already in place!
E8050160
IP address cannot be empty!
E8050161
Max number of IP addresses exceeded!
Error Code
Error Message