DX3000 and DX5000 Quick Start Guide
United States of America
Quantum Corporation
141 Innovation Drive
Irvine, CA 92612
U.S.A.
phone 949.856.7800
fax 949.856.7799
European Headquarters
Quantum Corporation
3 Bracknell Beeches
Old Bracknell Lane West
Bracknell
Berkshire RG12 7BW
United Kingdom
phone +44 1344 353500
fax +44 1344 353510
Asia Pacific
Quantum Corporation
9 Temasek Boulevard, #08-03
Suntec Tower Two
Singapore 038989
Tel: +65 6334 0660
Fax: +65 6432 2830
Email: [email protected]
©2006 Quantum Corporation. Quantum, the Quantum logo, and the DLTtape logo are all registered trademarks of Quantum Corporation. SDLT and Super DLTtape are trademarks of
Quantum Corporation. Other trademarks may be mentioned herein which belong to other companies.
81-81492-04 A01 June 2006
Figure 20 Cartridge Creation
(DX5000 with Twelve Drives)
11
Select the volume(s), either
All Volumes
or
Volume
Name
, where the tape cartridges will be created.
12
Create cartridges by either quantity or capacity:
•
If you select
By quantity
, you can create between 1
and 400 cartridges per LUN. The capacity decreases
the more tape cartridges you create.
•
If you select
By capacity
, you choose between 5
GB and the maximum capacity of the logical
drive per cartridge. The number of cartridges
decreases with higher capacity per cartridge.
13
Enter the starting cartridge barcode.
N
OTE
:
The maximum number of cartridges depends
on the size of the volumes created in the
Media Areas Configuration
section.
N
OTE
:
The barcode format must be AANNNN, where
A is any uppercase alpha-numeric character
and N is any single digit (0-9). Barcodes
automatically increment.
14
Click
Next
.
The
Finish System Setup
screen displays.
15
Click
OK
to apply your settings.
The DX3000/DX5000 is configured and ready for
operation. Refer to the
Quantum DX3000 and DX5000
User’s Guide
(PN 81-81493)for additional information.
