Quantum ACL 4/52, Руководство по установке

Страница: 55 / 68

Appendix B Supplemental Installation Procedures
Loading the Library with Cartridges
ACL 4/52 Facilities Planning and Installation Guide 39
Loading the Library with Cartridges
2
Note: The “Auto-Load” feature must be “Enabled” before performing this
procedure. If this feature is not currently Enabled, refer to
“Enabling/Disabling the Auto-Load Feature” on page 36.
Caution:
Examine all cartridges before loading them into the library
or tape drive. Look for label stock or other foreign material
that may be clinging to the cartridges.
1
With the SDA displaying System On-line , press and release the
load port OPEN
button and verify that the indicator begins
blinking. (After several seconds, the load port door will
automatically open.)
Warning: Mechanical hazards could be exposed when the load port is
partially open or closed. Do not attempt to insert hands or
fingers into the load port opening at any time.
2
With the load port door open, place up to four cartridges in the
available load port bins.
3
Press and release the load port CLOSE button.
Warning: The load port door is LOCKED in the “open” position. You
must press and release the CLOSE button before
attempting to close the load port door.
4
When the
CLOSE
Indicator (LED at the upper left corner of
CLOSE button) is steadily lit, push the Load Port door closed. (The
library will lock the door.)
5
Repeat Steps 1 through 4 until you have loaded a maximum of 48
DLT™ cartridges into the library.