Quantum ACL 4/52, Руководство по установке

Страница: 51 / 68

Appendix B Supplemental Installation Procedures
Enabling/Disabling the Auto-Clean Option
ACL 4/52 Facilities Planning and Installation Guide 35
6
Press the
↓
button four (4) times to bypass the Inquiry , SCSI
Address, Power-Up State,
and
Num of Drives
menus. Then verify
that the following is displayed in the SDA:
7
With
Auto Clean
displayed on Line #2 of the SDA, press and
release the SELECT button and verify that the following is
displayed in the SDA:
Note:
“Disabled” is the default. If you want to change the automatic cleaning
state to “Enabled,” proceed to Step 8. Otherwise, exit the Menu Mode.
8
With the desired option displayed on Line #2, press and release the
SELECT button.
9
Press and release the
↑
or
↓
button to clear the resulting display
from the command.
10
Press and release the
↑
or
↓
button and the SELECT button
simultaneously, and verify that
System On-line
or
System Off-Line
is displayed in the SDA.
M e n u : C o n f i g u r a t i
A u t o C l e a n . .
M e n u : A u t o C l e a n
E n a b l e d