18
www.pridemobility.com
Quantum Dynamo ATS RevE/May03
COMFORT ADJUSTMENTS
JOYSTICK EXTENSION
The joystick/controller can easily slide out away from the armrest or in
toward the armrest.
To extend the joystick:
1.
Use a 1/8-in. hex key to loosen the setscrews in the joystick mount-
ing block. See figure 13.
2.
Slide the joystick mounting bracket into or out of the mounting block
to the desired position.
JOYSTICK POSITION
You can position the joystick for either left-hand or right-hand use.
To change the joystick position:
1.
Disconnect the joystick/controller harness from its connector on
the electronics tray. See figure 3.
2.
Cut the wire tie that attaches the joystick/controller harness to the
armrest.
3.
Use a 1/4-in. hex key to loosen the socket head screws located on
the right side of the joystick mounting block.
4.
Slide the mounting block off of the armrest and place it on the other
armrest.
5.
Tighten the screws.
6.
Connect the joystick/controller harness and secure it to the armrest
with a wire tie.
ANTI-TIP WHEELS
The Quantum Dynamo ATS mid-wheel drive design provides superior
performance and safety. The anti-tip wheels are an integral part of this
design because they provide you with stability during deceleration. The
anti-tip wheels are preset at the factory to a height of 3/4-in. off the
ground. This is the ideal setting for most Quantum Dynamo ATS users.
However, you may encounter situations where you may need to adjust
the anti-tip wheels. For instance, if you drive your power chair on sur-
faces such as deep pile carpeting, you may notice that the anti-tip wheels
have a tendency to drag on the carpet. In this case, you may need to
raise the anti-tip wheels. If you drive your power chair primarily on smooth
surfaces such as linoleum or tile, you may find that you tip forward
more than is comfortable for you. (This may be more apparent for lighter
users.) In this case, you may need to lower the anti-tip wheels.
WARNING! Consult your authorized Pride provider be-
fore attempting to change the anti-tip wheel height!
Changing the anti-tip height affects handling under de-
celeration!
WARNING! The higher you raise the anti-tip wheels, the
more you increase your power chair’s tendency to tilt
forward when coming to a stop. You can compensate
for this by having your authorized Pride provider make
a small adjustment to the pre-programmed deceleration
setting in the controller or by moving the seat asembly
further to the rear of your power chair.
NOTE: Before making height adjustments on your anti-
tips, consult your authorized Pride provider to make sure
that your seat is positioned properly. Moving your seat
rearward one (1) inch may be sufficient.
Figure 11. Removable Armrest Height
Adjustment
BUTTON HEAD
SCREWS
ARMREST
Figure 12. Leg Rest Length Adjustment
REMOVE SCREWS
Figure 13. Joystick Extension Adjustment
LOOSEN SCREWS
JOYSTICK MOUNTING BRACKET
Содержание Dynamo ATS
Страница 39: ......