Cubiscan 325 Service Manual
1 8
CHAPTER 3
CLEANING
This section describes the procedure used to clean the Cubiscan 325. The Cubiscan 325 should
be cleaned as often as needed to maintain optimum performance.
Cleaning the Gate Filters
This section describes how to clean the gate filters. While dust won’t normally interfere with
operation, they should be cleaned routinely to prevent the possibility of interference.
To clean the gate filters, use a clean, damp (if needed), microfiber cloth. Use water to dampen
the cloth; do not clean the gate filters with a solvent as this could cause damage.
Cleaning the Glass Platform
This section describes how to clean the glass platform.
To clean the glass platform, remove it from the Cubiscan 325. Clean both sides of the platform
thoroughly with a clean, damp cloth. You can use small amounts of glass cleaner to clean the
glass if necessary, making sure that the glass cleaner does NOT come into contact with the gate
filters. If glass cleaner comes into contact with the gate filters they may need to be replaced.
If the glass platform is scratched it may interfere with measurements. Remove the glass platform
and try measuring. If this resolves the problem, you may need a new glass platform. If you need
to order a new platform, please contact Cubiscan Technical Assistance at 801.451.7000.
Cleaning the Touchscreen
This section describes how to clean the touchscreen.
To clean the touchscreen, moisten a soft cloth with water, then gently wipe the screen clean with
the cloth. Do not spray liquid directly on the touchscreen.
