Quantrax COMPUTHERM Q5RF, Руководство по эксплуатации

Страница: 17 / 24

- 17 -
COMPUTHERM
Q5RF (TX)
thermostat:
• Separate the back panel of thermostat
COMPUTHERM
Q5RF(TX)
from the front panel by pushing the latch located on
the upper side of the case.
• Press and hold buttons „ LEARN ” and „ RESET ” located inside
the thermostat smultaneously.
• Release the „ RESET ” button and keep the „ LEARN ” button de-
pressed for additional 5 seconds.
• Following this, sign U1 appears on the display of the thermo-
stat, indicating that the thermostat can now be synchronized
with zone 1 of the receiving unit.
• If a lettering other than U1 appears on the display of the thermo-
stat, select zone 1 with the help of buttons and .
• Press and hold the „ LEARN ” button located inside the
thermostat for approx. 3 seconds until the green LED on the
COMPUTHERM
Q1RX
plug stops flashing.
After the two units have been synchronized, the thermostat con-
trols the plug according to the temperature program having been
set. When the thermostat is switched on, 230 V, 50 Hz mains volt-
age appears on the output socket of the plug.