Quantel Medical Aviso, Руководство по обслуживанию

Страница: 15 / 28

15 Rev 04-2009
SERVICE MANUAL
4- DISASSEMBLING
4-3-2 TOUCH SCREEN BLOCK ASSEMBLING
The critical step is the positioning of the cover upon the screen
1. Place the cover sliding carefully the cables inside the aperture.
2. Place 2 screws identified A on the picture without screwing them
completly in the way to pre position the cover.
3. Approach the 4 screw without head gently inside there screen
housing and let absolutly 3 or 4 mm outside of the cover.
WARNING : Never tighten hardly these screws.
The new tactile glass must be replaced with 3 new flat strip joints and
one new flat joint.
1. Place the 3 new flat strip
joints on the metalic support.
Place the short strip on the
down part of the metallic
piece.
Take care to have the strips
layed flat and not
superimposed.
2. Place the tactile glass
carefully with the green way
above
3. Place back the flat joint. The
washer doesn’t need to be
placed back.
4. Place back the screen upon
the flat joint.
Nappe de la
Piste verte
sur le
Down part
Green
way
Flat cable