3
Mounting
1.
Mark and drill the fixing holes onto lintel and door leaf according to the respective
drawing. The chassis can be used as a drilling template.
Caution: Please pay attention to the orientation of the chassis profile! The fixing holes of
the drive module must always be on the side facing the door hinge!
2.
Fasten the chassis by means of six screws M6 to lintel.
3.
Fasten the drive module by means of four screws M5 to the chassis.
Important: Please pay attention to the drive unit’s sense of rotation!
a.
For normal rods and sliding rods with pushing function, the arrow with description
‘’PUSH’’ points to the chassis.
Fixing holes drive module
PUSH
